Product Description:
The automotive training equipment electrically controlled gasoline engine training model displays the basic principles and structures of electrically controlled gasoline engine, and simulates its operation. This electrically controlled gasoline engine training model automotive training equipment can be used to learn the basic knowledge, inspection work and other knowledge and skills of electrically controlled gasoline engine. The automotive training equipment engine training model is also suitable for the teaching and skills training of electrically controlled gasoline engine in higher vocational colleges and secondary vocational colleges. Meanwhile, automotive training equipment engine training model can also be used as an educational equipment for skill training and skill appraisal in technical schools, vocational education centers, and vocational qualification appraisal stations.
Technical Parameter:
Dimensions: 1000x1500x1800mm;(LxWxH)
Battery: DC12V/60AH
Coolent: Glycol
Fuel Tank: 10L
Product Description:
| Gasoline Engine Assembly |
1Pc |
| ECU |
1Pc |
| DashBoard |
1Pc |
| Fault Setting Module (Manual Switch Type) |
1Pc |
| Battery |
1Pc |
| Test Panel with circuit schematic |
1Pc |
| OBD Diagnostics Seat |
1Pc |
| Mobile Stand |
1Pc |
| Intake Vacuum Pressure Guage |
1Pc |
| Fuel Pressure Guage |
1Pc |
| Sensor Signal Meter |
1Pc |
| Fire Extinguisher |
1Pc |
Main features:
1. This trainer can simulate normal engine operation, ie, starting, idling, acceleration, deceleration, fault detection and diagnosis, fault simulation, etc.
2. Equipped with fault setting module can simulate common faults in the real engine. 3. Equipped with voltmeter to show the real-time change of the sensors and actuators
4. Equipped with LED indicators to simulate the status of the injecting system and ignition system.
5. Equipped with pressure gauges to display the pressure value and vacuum pressure value.
6. Equipped with diagnosis seat which supports to read the fault codes and data stream of the engine control system through the diagnosis seat.
7. The training panel is printed with a color circuit schematic diagram, 'so that students can directly view the diagram to analyze the faults of the engine circuit.
8. The panel is equipped with test terminals. The resistance, voltage, current, frequency, waveform and other electrical signals of sensors and actuators can be measured through the test terminals.
9. Equipped with power switch, tank guard, flywheel and other rotating parts shields.
10. Equipped with fault setting module: Manual switch type (Optional intelligent type).
Training courses
1. Introduction of main components;
2. Demonstration of engine operation, startup, acceleration, etc.;
3. Sensor and actuator signal measurement,
4. Operation of the scanner,
5. Fault set and troubleshooting;
6. Engine basic maintenance;
Custom Engine Models Also Available.
